Faded, patchy pavers brought back without tearing them out
Paver Restoration and Resealing in Sandalwood, FL
Call (904) 541-9860 for a free restoration estimate on your Sandalwood pavers.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can pavers in Sandalwood be restored instead of replaced?
Yes, a local contractor restores worn pavers across Sandalwood, FL, and you will hear back within 1 business day, usually much sooner. The visit is free, and you decide afterward whether to book it. Pool decks, driveways, walks and patios can all be restored. To start, call (904) 541-9860.
Restoration fits pavers that are still sound but look tired: faded color, a cloudy or peeling coat, joints that have lost their sand. Taking the old finish off and starting clean usually costs far less than ripping the surface out. Picture the driveway that greets guests looking even again. To have yours looked at, get a free estimate.
What does paver restoration include?
Restoration is a sequence, not a single spray. Safe Touch, a Jacksonville washing company, describes it as clean, re-sand and seal, with failed sealer stripped first. To see which steps your pavers need, call (904) 541-9860.
Inspection
The contractor walks the surface, measures it and notes old coatings, empty joints, cracked pavers and low spots.
Stripping
Failed sealer comes off before anything new goes on, since Safe Touch says it is stripped first and not coated over.
Joint sand
Fresh sand fills the joints once the surface is clean and dry, so weeds have less room and pavers hold steady.
Resealing
A new coat goes on a dry surface, which helps color and makes the next wash easier.
Which Sandalwood-area neighborhoods can book paver restoration?
A local contractor covers Sandalwood and the neighborhoods around it, and restoration is available in all of them. Pick your page below for local notes. If your street is missing, call (904) 541-9860.
How do I know my pavers need restoration instead of a simple wash?
A wash fixes dirt. Restoration fixes a surface that has stopped doing its job. Look for the signs below, then book a visit so a contractor can confirm. To set one up, call (904) 541-9860.
Are the joints empty or low?
Safe Touch says summer storms wash sand out, and empty joints let pavers shift and weeds root. Sand below the paver edges is the early warning. For a joint check, get a free estimate.
Is the finish cloudy, patchy or peeling?
A coat that has failed shows as patches that shine next to patches that do not. Safe Touch strips that kind of coat before resealing. Tell the contractor where it looks worst when you call (904) 541-9860.
Has the color gone flat?
Unilock, a paver maker, says sealer can enhance paver color and help against future staining. Flat, chalky pavers are the ones that gain most. To compare a before and after, get a free estimate.
Does water soak in instead of beading?
That is the plainest sign a coat has worn out. Safe Touch calls 2 to 3 years typical around Jacksonville. Describe how yours behaves when you call (904) 541-9860.
Why does failed sealer have to come off before resealing?
New sealer needs a sound surface to grip. Safe Touch says failed sealer is stripped and not coated over, and that sealing over dirt or damp pavers is how jobs fail. Stripping adds cost, but skipping it costs more later. For a quote that shows both choices, get a free estimate.
What does a bad layering job look like?
Cloudy film, flaking edges and a surface that looks different from one paver to the next. Marblelife, a stone care company, notes that topical coatings can peel or flake, and the same risk applies when a film sits on any paver. Show the contractor your trouble spots at (904) 541-9860.
Will stripping hurt the pavers?
Western Interlock, a paver supplier, keeps surface cleaners under 1,500 PSI with heads about an inch above the stone. Careful tools matter more than force. Ask about the tool when you get a free estimate.
Can I skip stripping and save money?
You can ask for a price both ways. Safe Touch says a strip and reseal costs more than a standard job, and it also says coating over a failure is where trouble begins. To get both numbers, call (904) 541-9860.
What is the paver restoration process, step by step?
Most restorations follow the same order, though a heavy job takes longer. Safe Touch calls a job with empty joints or a failed coat a two day restoration. To pick a start date, call (904) 541-9860.
1. Measure and inspect
The contractor measures the area and marks failed coating, empty joints, cracks and low spots.
2. Strip what failed
Old sealer that has peeled or clouded comes off first, as Safe Touch describes.
3. Wash gently
A surface cleaner with rotating heads stays under 1,500 PSI, per Western Interlock, and avoids blasting sand from joints.
4. Let it dry
Sealer goes on a dry surface so it does not turn milky, which Safe Touch stresses.
5. Refill the joints
Fresh sand goes in before the coat, since Safe Touch says sealing over empty joints lets weeds return.
6. Seal and walk through
The coat goes on in one pass, and the contractor explains how long to stay off it.
Why can a restoration take two days in Sandalwood?
Safe Touch says empty joints or a failed sealer turn the job into a two day restoration. The first day handles stripping, washing and sanding, and the second handles drying checks and sealing. To plan your driveway around it, call (904) 541-9860.
What can I do with the cars?
A driveway job needs the cars parked elsewhere until the sealer cures. Ask for the exact window when you get a free estimate.
What happens if it rains?
Sealer needs a dry surface, so a wet forecast moves the sealing day. Ask how rescheduling is handled when you call (904) 541-9860.
What do Sandalwood storms do to joint sand?
Sandalwood sits in Duval County, where In Safe Touch's words, summer storms carry sand out of pool decks and driveways. Sand that leaves the seams leaves the pavers free to shift. The cure is fresh sand every restoration. To book yours, call (904) 541-9860.
Why do edges go first?
Water runs to the low edge of a driveway and carries sand with it. That edge is where weeds start. Point out low edges when you get a free estimate.
Do sprinklers add to the problem?
They can. A head that soaks one spot every day wears that seam faster, and UF/IFAS says well water high in iron can leave orange streaks where it lands. Tell the contractor where each head sits at (904) 541-9860.
When is the right season to restore pavers in Sandalwood?
Safe Touch describes fall as a drier stretch before winter, which makes it a natural window around Jacksonville. Sealer needs a dry surface before and after the coat. If fall is booked, any dry week works. To find a slot, call (904) 541-9860.
Is summer a bad time?
Safe Touch ties storms to lost joint sand, and sealer needs a dry surface, so dry windows are shorter. Summer jobs can still happen with a flexible date. To ask about flexibility, get a free estimate.
How often will restored pavers need resealing?
Safe Touch calls 2 to 3 years typical around Jacksonville, and Unilock says aftermarket sealers on its pavers are reapplied every 3 to 5 years. Full sun, pool chlorine and storm washout shorten the span, per Safe Touch. To plan your next coat, get a free estimate.
What shortens the life of a coat?
Sun on an open driveway, chlorine splash on a deck and heavy storms are the three Safe Touch names. Shade and light traffic stretch it. To read your own conditions, call (904) 541-9860.
Is more frequent sealing better?
No. More sealer does not mean more protection, and a coat put on before the old one has worn can cloud. Ask the contractor to confirm the old coat has broken down when you get a free estimate.
What does paver restoration cost in Sandalwood?
Around Jacksonville, Safe Touch lists $1.75 to $3.25 a square foot for the clean, sand and seal sequence. It also says stripping a failed coat costs more than a standard job. For a figure on your own pavers, get a free estimate.
The table shows the standard sequence for common sizes, with stripping listed apart because no published Jacksonville price for it turned up. Bring a quote you already have and compare. To talk through one, call (904) 541-9860.
Want to see the sealing side alone? Read about driveway paver sealing, patio paver sealing or paver stain removal, or call (904) 541-9860.
| Paved area | Typical example | Clean, re-sand and seal range | Stripping a failed coat |
|---|---|---|---|
| 500 sq ft | Tired back patio | $875 to $1,625 | Listed apart, higher total |
| 900 sq ft | Faded two car driveway | $1,575 to $2,925 | Listed apart, higher total |
| 1,300 sq ft | Driveway and entry walk | $2,275 to $4,225 | Listed apart, higher total |
| 1,800 sq ft | Driveway and pool deck | $3,150 to $5,850 | Listed apart, higher total |
The middle column multiplies the $1.75 to $3.25 a square foot that a Jacksonville washing company publishes for the clean, sand and seal sequence, read in November 2026. That company also says stripping a failed coat costs more than a standard job, but no published Jacksonville figure for stripping alone turned up, so the last column shows no number. Ask for it as its own line on the quote.
Should I restore my pavers or replace them?
Sound pavers with a tired finish are restoration candidates. Pavers that are cracked, sunken or heaved may need repair first, and sealer cannot fix a failing base. A contractor can mark which areas fall on which side. To book that look, call (904) 541-9860.
How many pavers are damaged?
A few cracked pavers can be replaced within a restoration. Widespread settling is a bigger project. Count the trouble spots before you get a free estimate.
Does the home value matter?
Zip-codes.com lists a 2024 median home value of $312,900 for ZIP 32246. A driveway is the first thing buyers see, and restoring it costs far less than replacing it. To see your numbers, call (904) 541-9860.
Will owners benefit long term?
The same page shows 54.69 percent of occupied homes are owner occupied. Owners who plan to stay get years from a restoration. To plan one, get a free estimate.
What mistakes make a restoration fail?
Most failures come from rushing a step. The list below pulls from Safe Touch, Unilock and Western Interlock. To check that your quote avoids them, call (904) 541-9860.
Sealing over dirt or damp pavers
Safe Touch says this is how jobs fail. Sealer needs a clean, dry surface.
Blasting with high pressure
Unilock warns that high pressure dislodges joint sand and suggests a low setting at about 45 degrees.
Forgetting the sand
Western Interlock says washing removes joint sand. It has to go back before the coat.
Coating over a failure
Safe Touch says failed sealer is stripped first. A new coat on a failing one fails along the old lines.
Skipping the test
Safe Touch advises testing a small area on painted surfaces before treatment.
Ignoring the base
Sunken or rocking pavers need a base repair. Sealer cannot lift them.
What should I ask before booking a restoration?
A written quote protects you. Use these questions to compare bids. To get them answered, call (904) 541-9860.
Is stripping included?
The answer should be a clear yes or no with a price. Safe Touch says stripping costs more than a standard job. To get it itemized, get a free estimate.
Who fills the joints?
The quote should name the sand and say it goes in before the coat. Ask how extra sand is cleared off the surface. To confirm, call (904) 541-9860.
How many days will it take?
Safe Touch calls a failed-coat job two days. A one day quote for a failed coat is worth a question. To ask, get a free estimate.
How do restored pavers look in Sandalwood?
Frequently Asked Questions
Do you tamp down sand before laying pavers?
That step belongs to a new installation, where the base is compacted first. Restoration works on pavers already in place, so the sand work is refilling the joints once the surface is clean and dry. If the pavers rock underfoot, the base needs a repair that sealer cannot give.
Why is paver sealing so expensive?
Most of the cost is the work before the coat goes on. Safe Touch says empty joints or failed sealer turn a job into a two day restoration, and stripping an old coat costs more than a standard clean, sand and seal. Sealer is only one line on the bill.
How much should I pay for paver sealing?
Start from the published Jacksonville range of $1.75 to $3.25 a square foot to clean, sand and seal. A restoration with a failed coat should land above a standard job, and the quote should say whether stripping is included.
Which sealer is right for Florida pavers?
Ask which product goes on and why. Unilock says aftermarket sealers on its concrete pavers are reapplied every 3 to 5 years, while Safe Touch calls 2 to 3 years typical around Jacksonville. Sun, chlorine splash and heavy storms all pull the figure down toward 2 years.
Can a failed sealer be coated over?
Safe Touch says failed sealer is stripped first and not coated over. A new coat on top of a peeling one tends to fail along the same lines.
How long does paver restoration take?
Safe Touch calls a job with empty joints or a failed coat a two day restoration. Drying time between washing, sanding and sealing is the reason.
When is the right season for restoring pavers in Jacksonville?
Safe Touch points to fall, a drier stretch before winter. Sealer needs a dry surface, and summer storms wash joint sand out again.
Why do my pavers lose joint sand after storms?
In Safe Touch's words, summer storms carry sand out of pool decks and driveways. Empty joints let pavers shift and give weeds a place to start.
Can pressure washing alone restore my pavers?
It cleans but does not protect, and heavy pressure can do harm. Unilock warns that high pressure dislodges joint sand and suggests a low setting at about 45 degrees. Western Interlock keeps surface cleaners under 1,500 PSI.
Is restoration worth it, or should pavers be replaced?
If the pavers are sound, restoration costs a fraction of replacing them. Cracked or sunken areas may need repair first, and a contractor can mark which parts need it.
Should pavers be sanded again after cleaning?
Yes. Western Interlock says washing removes joint sand, and Safe Touch says sealing over empty joints lets weeds return. Fresh sand goes in before the coat.
Want your Sandalwood pavers restored this season?
Call or use the short form, and a local contractor writes back within 1 business day, usually much sooner.
Free, no obligation