Red brick pavers that stay rich and stop flaking
Brick Paver Sealing in Sandalwood, FL
Call (904) 541-9860 to book a free brick paver sealing estimate in Sandalwood.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can a local contractor seal my brick pavers in Sandalwood, and how quickly?
Brick paver sealing in Sandalwood, FL is available from a local contractor, and your request gets an answer within 1 business day, and usually well before that. The estimate is free, and you can say no after hearing the price. A contractor looks at the brick, names the sealer and writes the price down before any work is booked. To begin, call (904) 541-9860.
Brick asks for different care than gray concrete pavers, because it breathes. A contractor who knows that picks the sealer for the material, tests a spot and keeps moisture from getting trapped, which is where most brick problems begin. Mention the age of your brick when you get a free estimate.
Why does brick need a different sealer from concrete pavers?
Brick lets moisture move in and out of the face, and the wrong coat blocks that. Old Mill says brick is naturally breathable and a wrong sealer can trap moisture, causing efflorescence, spalling or surface damage. That one fact shapes the whole job. To talk it through, call (904) 541-9860.
What is a breathable penetrating sealer?
It soaks into the brick and works below the surface. DRYLOK says silane and siloxane sealers react chemically with the surface to form a barrier inside the pores. Lurveys says penetrating sealers keep a natural look. Ask for the product name when you get a free estimate.
What about acrylic or urethane coatings?
Old Mill says not to use film-forming coatings such as acrylics or urethanes outdoors on brick. A film sits on top and can hold water behind it. If a quote names an acrylic for a brick patio, ask why. To check a quote, call (904) 541-9860.
Is there ever a reason to want a wet look?
Some owners do. DRYLOK says solvent-based wet-look sealers are also penetrating formulas, and Lurveys describes wet-look options from subtle to brilliant. Compare a sample before choosing, and get a free estimate.
What problems does sealing prevent on brick pavers?
Two show up most in a humid city: efflorescence and spalling. Each starts with water, and each can be slowed by the right sealer. To see if either is starting on your brick, call (904) 541-9860.
What is the white haze on my brick?
It is efflorescence. DRYLOK calls it a white powdery substance left when water evaporates and leaves mineral deposits, and Lurveys says it is not usually a structural concern. Either way, the rule is the same: clean it first. Mention it when you get a free estimate.
What is spalling?
DRYLOK says unsealed brick is vulnerable to spalling, where the outer layer begins to peel away. Sealer does not repair a face that has already flaked, but it slows the damage on brick that has not. To check, call (904) 541-9860.
Can sealing lock in a problem?
Yes. Old Mill says never to seal over moisture, dirt or efflorescence, because they get locked in. Lurveys warns that sealing over efflorescence can trap it under the finish. Cleaning and drying come first, then get a free estimate.
Does a humid climate change the case for sealing?
DRYLOK says sealing matters most in humid environments. Weatherspark calls August muggy 99 percent of the time in Jacksonville. Brick in shade that never fully dries has the strongest case. Ask about your shaded corners at (904) 541-9860.
What is the brick paver sealing process?
The order is simple, and each step is checked before the next. The six below match what DRYLOK, Old Mill and Unilock describe. To go through them for your brick, call (904) 541-9860.
1. Look and test
The contractor checks for flaking, low joints, old coatings and efflorescence, then tests a small hidden area, as Old Mill advises.
2. Treat what is on top
Algae, dirt and efflorescence come off before anything goes on, and acid cleaners are not used on surfaces they harm.
3. Dry it through
DRYLOK says to allow an overnight drying period after washing. Unilock says a shaded spot can need about 24 hours.
4. Refill the joints
New joint sand goes in, and none is left on the surface, because sealer traps anything sitting on top.
5. Apply the sealer
DRYLOK says to spray when air and surface are 50 degrees or warmer, without thinning the product.
6. Keep off while it cures
Unilock asks for up to 48 hours of dry weather and for sprinklers to stay off.
How long should new brick wait before it is sealed?
Longer than most owners expect. Old Mill says at least 30 days on new brick and ideally up to a year, so it can cure and efflorescence can fade. Unilock says 60 to 90 days for new pavers, and Jax Exterior Cleaning says 90. Share your install date when you get a free estimate.
Does old brick need a wait too?
No, but it needs a clean. Old brick carries years of moss and dirt, and sealer holds whatever is under it. For a first look, call (904) 541-9860.
How do I tell if the bedding is still damp?
You cannot always tell. A Jacksonville company says bedding sand can stay damp after rain, and Lurveys says a surface may look dry while holding moisture below. A contractor checks before the coat. To schedule a check, get a free estimate.
What does brick paver sealing cost in Sandalwood?
No page gives a Sandalwood price for brick alone, so the table is built from published pieces. The full job runs $1.75 to $3.25 per square foot in Safe Touch's Jacksonville pricing, and Unilock says sealer covers about 80 to 150 square feet a gallon at $80 to $150 a gallon. To get a written price, get a free estimate.
Old brick often needs more cleaning, and failed coatings add stripping. A small walk may price higher per foot than a wide courtyard. Compare any bid with the rows, and call (904) 541-9860 if it sits far outside them.
| Brick area | Typical example | Full clean, sand and seal | Gallons of sealer, one coat |
|---|---|---|---|
| 200 sq ft | Front walk | $350 to $650 | 1.3 to 2.5 |
| 450 sq ft | Courtyard or patio | $788 to $1,462 | 3.0 to 5.6 |
| 700 sq ft | Brick driveway | $1,225 to $2,275 | 4.7 to 8.8 |
| 1,000 sq ft | Driveway and entry court | $1,750 to $3,250 | 6.7 to 12.5 |
The third column multiplies the $1.75 to $3.25 per square foot that Safe Touch published. The fourth divides the area by the 150 and 80 square feet a gallon that Unilock lists. Read in November 2026. Your quote may land elsewhere, and stripping old coatings usually costs extra.
How long does a coat on brick last in Sandalwood?
Expect two to five years, and let the surface decide. Unilock says reseal every 3 to 5 years, Safe Touch calls two to three typical for Jacksonville, and Lurveys says there is no universal schedule. Penetrating products leave no film to peel, so watch for water soaking in. To see yours, call (904) 541-9860.
What shortens a coat?
Jax Exterior Cleaning says intense UV, heat and heavy rain speed sealer breakdown in Jacksonville. Full sun on a south facing wall is the usual cause. Tell the contractor where your brick sits when you get a free estimate.
What happens if the coat is never renewed?
Water gets in, and the face can flake. DRYLOK says unsealed brick can spall. Renewing early costs less than replacing pavers. To book a check, call (904) 541-9860.
What should I ask before a contractor seals my brick?
Five short questions settle most of it. A good contractor answers them in plain words. To ask them on a call, get a free estimate.
Which product goes on?
Ask for the name and whether it is a breathable penetrating silane or siloxane.
Will you test a spot?
Old Mill says to test a small hidden area and let it dry fully first.
What happens to the efflorescence?
It should be cleaned off first, not sealed in.
How long before sealing?
Ask how long the brick must dry after washing, and what the plan is if it rains.
Who approves the finish?
A Jacksonville company says gloss and color-enhancing finishes more often need HOA approval.
How do older Sandalwood brick patios and drives differ from newer ones?
NeighborhoodScout says many Sandalwood homes were built in 2000 or later and a number between 1970 and 1999. Brick from the older group may have decades of moss on it, and brick from the newer group may still be curing. To tell the contractor which yours is, call (904) 541-9860.
Is moss a sign of trouble?
It is a sign of moisture. A Jacksonville company says shaded patios and north facing walls grow algae and mildew. Brick that stays damp is the brick that flakes first. Mention it when you get a free estimate.
Do lime-based brick surfaces change anything?
They can. Old Mill warns against acid cleaners on its lime-based brick surface even after sealing. Ask what cleaner is used on yours at (904) 541-9860.
What do sealed brick pavers look like around Sandalwood homes?
Questions Sandalwood homeowners ask about brick paver sealing
How to seal your brick pavers?
A contractor washes the brick, lets it dry, and applies a breathable penetrating sealer, then keeps traffic off while it cures. Old Mill says to use only breathable penetrating silane or siloxane products outdoors. Ask which product goes on when you get a free estimate.
Why is paver sealing so expensive?
The prep takes the most time, especially on old brick. It has to be washed and dry through, and Old Mill says never to seal over moisture, dirt or efflorescence. Sealer runs $80 to $150 a gallon, Unilock says. Ask each step to be priced at (904) 541-9860.
How long do paver sealers last?
Two to five years is the span the sources give. Unilock says reseal every 3 to 5 years, and Safe Touch calls two to three years typical for Jacksonville. Penetrating products have no coat to peel, so look at how water behaves. Call (904) 541-9860 for a check.
Do I need to seal pavers in Florida?
It is optional. DRYLOK says sealing matters in humid climates and that unsealed brick can spall, which is when the outer layer peels. Jacksonville's air is humid, so brick in damp shade has the strongest case. To decide for yours, get a free estimate.
Can brick pavers be sealed with any sealer?
No. Old Mill says not to use film-forming coatings such as acrylics or urethanes outdoors on brick, because brick is naturally breathable and a wrong sealer can trap moisture. Lurveys lists sealers made for clay and concrete. Ask for the label when you get a free estimate.
What does spalling look like on brick pavers?
The face flakes or peels away in thin layers. DRYLOK says unsealed brick is vulnerable to it. Once it starts, sealer will not put the face back. If you see flaking, call (904) 541-9860.
How long should new brick wait before sealing?
At least 30 days, and ideally up to a year, according to Old Mill. Unilock says 60 to 90 days for new pavers, and Jax Exterior Cleaning says 90. Waiting lets efflorescence clear. The install month helps, so mention it when you get a free estimate.
Will sealer change the color of brick pavers?
It can darken them or change the sheen. Old Mill says to test a small hidden area and let it dry fully before sealing the whole surface. A natural-look sealer changes the least. Ask for a test patch at (904) 541-9860.
Can acid cleaners be used on brick pavers?
Not on every brick surface. Old Mill says never to use acid cleaners on its lime-based thin brick even after sealing, and CMHA says acid spills hurt pavers far more than salt does. Ask what cleaner is used on yours when you get a free estimate.
How soon after washing can brick be sealed?
After it dries completely. DRYLOK says to allow an overnight drying period after washing. Unilock says a shaded spot can need about 24 hours, against a few hours in warm sun. Lurveys warns a surface may look dry and still hold moisture. For a schedule, call (904) 541-9860.
What does brick paver sealing cost per square foot?
A Jacksonville washing company lists $1.75 to $3.25 per square foot to clean, sand and seal. A 450 square foot courtyard comes to about $788 to $1,463. Stripping old coats usually costs extra. To get your own number, get a free estimate.
Where else does a local contractor seal brick near Sandalwood?
Each neighborhood has its own page. If your street is missing, call (904) 541-9860.
Ready to have your brick looked at?
Call or fill in the short form, and a Sandalwood contractor answers within 1 business day, often much sooner.
Free, no obligation